[ 0.000000] Linux version 4.19.151-1 (wbx@gcc67) (gcc version 8.4.0 (GCC)) #1 Sat Jan 2 16:02:08 CET 2021 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] Config serial console: console=ttyS0,38400n8r [ 0.000000] CPU0 revision is: 00019300 (MIPS 24Kc) [ 0.000000] FPU revision is: 00739300 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 07fff000 @ 00000000 (usable) [ 0.000000] Initial ramdisk at: 0x87f30000 (621004 bytes) [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x0000000007ffefff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffefff] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32511 [ 0.000000] Kernel command line: rd_start=0xffffffff87f30000 rd_size=621004 console=ttyS0,38400n8r console=ttyS0,115200 ro rootfstype=tmpfs [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 124940K/131068K available (2424K kernel code, 153K rwdata, 340K rodata, 212K init, 188K bss, 6128K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] CPU frequency 200.00 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112515595 ns [ 0.000104] sched_clock: 32 bits at 100MHz, resolution 9ns, wraps every 21474736123ns [ 0.002177] Calibrating delay loop... 771.07 BogoMIPS (lpj=1542144) [ 0.028650] pid_max: default: 4096 minimum: 301 [ 0.029546] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.029709] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.052817] devtmpfs: initialized [ 0.056900] random: get_random_u32 called from 0x80216708 with crng_init=0 [ 0.058490] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.058804] futex hash table entries: 16 (order: -5, 192 bytes) [ 0.060279] NET: Registered protocol family 16 [ 0.080015] PCI host bridge to bus 0000:00 [ 0.080498] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] [ 0.080717] pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] [ 0.080925] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] [ 0.081130] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.082930] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) [ 0.083105] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) [ 0.083287] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 0.083454] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) [ 0.083646] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) [ 0.086059] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.086244] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.086421] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.086600] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.087591] pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI [ 0.087817] pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB [ 0.089749] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x11ffffff pref] [ 0.090150] pci 0000:00:13.0: BAR 6: assigned [mem 0x12000000-0x1203ffff pref] [ 0.090387] pci 0000:00:13.0: BAR 0: assigned [mem 0x12040000-0x1205ffff] [ 0.090541] pci 0000:00:12.0: BAR 6: assigned [mem 0x12060000-0x1206ffff pref] [ 0.090702] pci 0000:00:12.0: BAR 1: assigned [mem 0x12070000-0x12070fff] [ 0.090903] pci 0000:00:13.0: BAR 1: assigned [io 0x1040-0x107f] [ 0.091072] pci 0000:00:0a.2: BAR 4: assigned [io 0x1080-0x109f] [ 0.091230] pci 0000:00:0a.1: BAR 4: assigned [io 0x10a0-0x10af] [ 0.097076] clocksource: Switched to clocksource MIPS [ 0.102771] NET: Registered protocol family 2 [ 0.105691] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) [ 0.105953] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.106169] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.106385] TCP: Hash tables configured (established 1024 bind 1024) [ 0.108030] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.108281] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.109327] NET: Registered protocol family 1 [ 0.113134] Unpacking initramfs... [ 0.409505] Freeing initrd memory: 604K [ 0.410365] devtmpfs: mounted [ 0.453228] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 1.017066] random: fast init done [ 1.065228] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.090102] console [ttyS0] disabled [ 1.116640] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.118607] console [ttyS0] enabled [ 1.118607] console [ttyS0] enabled [ 1.119133] bootconsole [uart8250] disabled [ 1.119133] bootconsole [uart8250] disabled [ 3.185100] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.283586] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 3.283879] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3.285351] e1000 0000:00:13.0: enabling device (0000 -> 0003) [ 3.683642] e1000 0000:00:13.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 [ 3.684251] e1000 0000:00:13.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.685496] NET: Registered protocol family 17 [ 3.733240] Starting Linux (built with OpenADK). [ 3.756020] Freeing unused kernel memory: 212K [ 3.756180] This architecture does not have kernel memory protection. [ 3.756399] Run /sbin/init as init process System initialization ... Starting network... done. Starting adktest... Starting test script ... Linux openadk 4.19.151-1 #1 Sat Jan 2 16:02:08 CET 2021 mips GNU/Linux Thu Jan 7 14:56:50 2021 -rwxr-xr-x 1 1539 1539 500244 Jan 2 16:06 /bin/busybox Hello World! (C) Hello World! (C) -rwxr-xr-x 1 1539 1539 30840 Jan 2 16:02 /lib/ld-uClibc-1.0.37.so -rwxr-xr-x 1 1539 1539 707604 Jan 2 16:02 /lib/libuClibc-1.0.37.so OpenADK git version: af0062c6d688bd534b8ab85a5c409878d9d885b1 Compiler used: Using built-in specs. COLLECT_GCC=/home/wbx/embedded-test/openadk/toolchain_qemu-mips_uclibc-ng_mips32_soft/usr/bin/mips-openadk-linux-uclibc-gcc COLLECT_LTO_WRAPPER=/home/wbx/embedded-test/openadk/toolchain_qemu-mips_uclibc-ng_mips32_soft/usr/libexec/gcc/mips-openadk-linux-uclibc/8.4.0/lto-wrapper Target: mips-openadk-linux-uclibc Configured with: /home/wbx/embedded-test/openadk/toolchain_build_qemu-mips_uclibc-ng_mips32_soft/w-gcc-8.4.0-1/gcc-8.4.0/configure --prefix=/home/wbx/embedded-test/openadk/toolchain_qemu-mips_uclibc-ng_mips32_soft/usr --with-bugurl=https://openadk.org --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=mips-openadk-linux-uclibc --with-gmp=/home/wbx/embedded-test/openadk/host_x86_64-linux-gnu/usr --with-mpfr=/home/wbx/embedded-test/openadk/host_x86_64-linux-gnu/usr --disable-__cxa_atexit --with-system-zlib --with-gnu-ld --with-gnu-as --disable-libsanitizer --disable-install-libiberty --disable-libitm --disable-libmudflap --disable-libgomp --disable-libcc1 --disable-libmpx --disable-libcilkrts --disable-libquadmath --disable-libquadmath-support --disable-decimal-float --disable-libstdcxx-pch --disable-ppl-version-check --disable-cloog-version-check --without-ppl --without-cloog --without-isl --disable-werror --disable-nls --disable-lto --with-arch=mips32 --with-float=soft --with-nan=legacy --enable-tls --enable-threads --enable-libatomic --enable-shared --enable-cxx-flags=-fPIC --disable-libssp --disable-biarch --disable-multilib --enable-languages=c --with-build-sysroot='/../../target_qemu-mips_uclibc-ng_mips32_soft' --with-sysroot='/../../target_qemu-mips_uclibc-ng_mips32_soft' Thread model: posix gcc version 8.4.0 (GCC) Linker used: GNU ld (GNU Binutils) 2.35