vpb_sic_write: Bad register offset 0x2c [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.149-1 (wbrodkorb@wbrodkorb-ws) (gcc version 8.3.0 (GCC)) #9 Fri Oct 18 09:06:01 CEST 2019 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00091176 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyAMA0,115200 ro rootfstype=tmpfs [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 127180K/131072K available (1739K kernel code, 87K rwdata, 256K rodata, 392K init, 176K bss, 3892K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0x00000000 - 0x00001000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0x00000000 - 0xffffffff (4095 MB) [ 0.000000] lowmem : 0x00000000 - 0x08000000 ( 128 MB) [ 0.000000] modules : 0x00000000 - 0x08000000 ( 128 MB) [ 0.000000] .text : 0x00008000 - 0x001bb2b8 (1741 kB) [ 0.000000] .init : 0x001fc000 - 0x0025e000 ( 392 kB) [ 0.000000] .data : 0x0025e000 - 0x00273de0 ( 88 kB) [ 0.000000] .bss : 0x00273de0 - 0x002a0084 ( 177 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @10140000: id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "intc" @ 10003000, 20 irqs, parent IRQ: 47 [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000153] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000559] Failed to initialize '/amba/timer@101e3000': -22 [ 0.000848] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.001934] Calibrating delay loop... 702.87 BogoMIPS (lpj=3514368) [ 0.170135] pid_max: default: 4096 minimum: 301 [ 0.171407] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.171464] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.197494] random: get_random_u32 called from 0x000c9844 with crng_init=0 [ 0.199003] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.199092] futex hash table entries: 16 (order: -5, 192 bytes) [ 0.201236] NET: Registered protocol family 16 [ 0.214027] OF: amba_device_add() failed (-19) for /amba/smc@10100000 [ 0.214534] OF: amba_device_add() failed (-19) for /amba/mpmc@10110000 [ 0.215181] OF: amba_device_add() failed (-19) for /amba/sctl@101e0000 [ 0.215415] OF: amba_device_add() failed (-19) for /amba/watchdog@101e1000 [ 0.217343] OF: amba_device_add() failed (-19) for /amba/sci@101f0000 [ 0.217594] OF: amba_device_add() failed (-19) for /amba/ssp@101f4000 [ 0.220315] OF: amba_device_add() failed (-19) for /amba/fpga/sci@a000 [ 0.221761] Serial: AMBA PL011 UART driver [ 0.224293] 101f1000.uart: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.231761] console [ttyAMA0] enabled [ 0.233560] 101f2000.uart: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.234261] 101f3000.uart: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.235020] uart-pl011 10009000.uart: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.235325] 10009000.uart: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.248084] clocksource: Switched to clocksource arm,sp804 [ 0.251527] NET: Registered protocol family 2 [ 0.255417] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.255696] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.255926] TCP: Hash tables configured (established 1024 bind 1024) [ 0.257764] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.258275] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.259676] NET: Registered protocol family 1 [ 0.550749] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 0.567099] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.570636] smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre [ 0.584992] smc91x 10010000.net eth0: SMC91C11xFD (rev 1) at 10010000 IRQ 41 [ 0.585470] smc91x 10010000.net eth0: Ethernet addr: 52:54:00:12:34:56 [ 0.586205] versatile reboot driver registered [ 0.587003] NET: Registered protocol family 17 [ 0.594761] Starting Linux (built with OpenADK). [ 0.606590] Freeing unused kernel memory: 392K [ 0.606795] This architecture does not have kernel memory protection. System initialization ... -n Starting network... done. -n Starting adktest... Starting test script ... Linux openadk 4.14.149-1 #9 Fri Oct 18 09:06:01 CEST 2019 armv5tejl GNU/Linux -rwxr-xr-x 1 root root 421312 Oct 16 2019 /bin/busybox Hello World! (C) Hello World! (C) OpenADK git version: ba3eb533284c66880857253d2149004334f1b7a8 Compiler used: Using built-in specs. COLLECT_GCC=/home/wbrodkorb/embedded-test/openadk/toolchain_qemu-arm-versatilepb_uclibc-ng_arm926ej_s_soft_eabi_flat_thumb_nommu/usr/bin/arm-openadk-uclinux-uclibceabi-gcc COLLECT_LTO_WRAPPER=/home/wbrodkorb/embedded-test/openadk/toolchain_qemu-arm-versatilepb_uclibc-ng_arm926ej_s_soft_eabi_flat_thumb_nommu/usr/libexec/gcc/arm-openadk-uclinux-uclibceabi/8.3.0/lto-wrapper Target: arm-openadk-uclinux-uclibceabi Configured with: /home/wbrodkorb/embedded-test/openadk/toolchain_build_qemu-arm-versatilepb_uclibc-ng_arm926ej_s_soft_eabi_flat_thumb_nommu/w-gcc-8.3.0-1/gcc-8.3.0/configure --prefix=/home/wbrodkorb/embedded-test/openadk/toolchain_qemu-arm-versatilepb_uclibc-ng_arm926ej_s_soft_eabi_flat_thumb_nommu/usr --with-bugurl=https://openadk.org --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=arm-openadk-uclinux-uclibceabi --with-gmp=/home/wbrodkorb/embedded-test/openadk/host_x86_64-linux-gnu/usr --with-mpfr=/home/wbrodkorb/embedded-test/openadk/host_x86_64-linux-gnu/usr --disable-__cxa_atexit --with-system-zlib --with-gnu-ld --with-gnu-as --disable-libsanitizer --disable-install-libiberty --disable-libitm --disable-libmudflap --disable-libgomp --disable-libcc1 --disable-libmpx --disable-libcilkrts --disable-libquadmath --disable-libquadmath-support --disable-decimal-float --disable-libstdcxx-pch --disable-ppl-version-check --disable-cloog-version-check --without-ppl --without-cloog --without-isl --disable-werror --disable-nls --disable-lto --with-cpu=arm926ej-s --with-float=soft --with-mode=thumb --disable-tls --enable-threads --disable-libatomic --disable-shared --disable-libssp --disable-biarch --disable-multilib --enable-languages=c --with-build-sysroot='/../../target_qemu-arm-versatilepb_uclibc-ng_arm926ej_s_soft_eabi_flat_thumb_nommu' --with-sysroot='/../../target_qemu-arm-versatilepb_uclibc-ng_arm926ej_s_soft_eabi_flat_thumb_nommu' Thread model: posix gcc version 8.3.0 (GCC) Linker used: GNU ld (GNU Binutils) 2.32